Stirrer Accessories
McMaster-Carr Clamping Two-Piece Shaft Collar
Clamping Two-Piece Shaft Collarfor 20 mm Diameter, 2024 Aluminum
Azzota Corp Ptfe Stirring Shaft With Foldable Paddles, 12"
PTFE Stirring Shaft with Foldable Paddles, 12"
Chemglass Life Sciences 25.4mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud
25.4mm Stirrer Shaft Coupling, Universal, 3/8" OD Stud. Coupling incorporates a universal joint to compensate for misalignment of drive motor and glass stirrer shaft. Nylon bushing compresses around shaft using an allen screw. Stainless steel stud attaches directly to the chuck of a stirrer motor. Supplied complete with an allen wrench.PLEASE NOTE: OTHER THAN OUR CG-2097 PROCESS REACTOR STIRRER SHAFTS, CHEMGLASS 19MM OD STIRRER SHAFTS HAVE A REDUCED TOP DIAMETER OF 12.7MM. WHEN ORDERING A UNIVERSAL COUPLING FOR A CHEMGLASS 19MM OD STIRRER SHAFT, USE PART NUMBER CG-2046-03.
Chemglass Life Sciences Replacement 19mm Stirrer Shaft, Reactor Size: 10L/15L/20L Unjacketed, Fits Support Frame: CG-1965-X-150, Overall Length: 29-3/16"
Replacement 19mm Stirrer Shaft, Reactor Size: 10L/15L/20L Unjacketed, Fits Support Frame: CG-1965-X-150, Overall Length: 29-3/16". Precision ground and polished stirrer shaft for use with Chemglass process reactors. Designed to utilize CG-2095 and CG-2096 PTFE agitators. Lower portion of stirrer shaft is sandblasted and has a 3/8¿ REPLACEMENT STIRRER SHAFTS ARE FOR USE WITH MECHANICAL SEAL STIR BEARING ON LISTED SUPPORT FRAME.
Ace Glass, Inc. Stirring shaft, 19mm, 37in, solid glass, polished, drilled type, bottom hole only
Stirring shaft, 19mm, 37in, solid glass, polished, drilled type, bottom hole only
Chemglass Life Sciences Stirring Shaft, 19mm, Chem-Stir, 1 to 2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt
Stirring Shaft, 19mm, Chem-Stir, 1000mL-2L Flasks, 555mm OAL, Complete with PTFE Nut and Bolt. A 19mm OD precision ground stirrer shaft with our patented** Chem-Stir blade attachment system. Shaft (C) has been manufactured with a ring at the lower end to permit attachment of the blade (B) with a PTFE nut (D) and bolt (A). Shaft is supplied complete with PTFE nut and bolt set. The top end of the stirrer shaft is reduced to 1/2" (12.7mm) to fit into a CG-2046-03 universal adapter while the unground length varies to accommodate different flask capacities. PLEASE NOTE: STIRRER BLADES MUST BE PURCHASED SEPARATELY.THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF PTFE BEARING. FOR POLISHED SHAFTS USED WITH PTFE BEARINGS SEE CG-2087.PLEASE NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences Stirring Shaft, 19mm, Polished, Button Style, for 1000 to 5000mL Flasks, 585mm OAL
Stirring Shaft, 19mm, Polished, Button Style, for 1000mL to 5000mL Flasks, 585mm OAL. A 19mm precision ground and polished stirrer shaft to fit CG-2086 19mm PTFE bearings. Side button for attachment of CG-2089 PTFE stirrer blades.PLEASE NOTE: THESE SHAFTS ARE NOT TO BE USED WITH ANY TYPE OF GLASS BEARING. FOR GROUND SHAFTS USED WITH GLASS BEARINGS SEE CG-2085.ALSO NOTE: 19MM SHAFTS HAVE A REDUCED DIAMETER TOP SECTION THAT IS 1/2"OD, PLEASE KEEP THIS IN MIND WHEN SELECTING THE PROPER SIZE COUPLING.
Chemglass Life Sciences PTFE Impeller Assembly, 171mm OAW x 368mm OAH, , for 15L VSA
Our PTFE impeller assemblies are designed to provide agitation forvertical side arm (VSA) vessels and spinners when used withcap adapter and Dura Drive overhead motor.PLEASE NOTE: STAINLESS STEEL IMPELLER ASSEMBLIES ARE AVAILABLE AS SPECIAL ORDER.
Chemglass Life Sciences Stirrer shaft, polished glass, 19 mm, 90° four-blade agitator - 630 mm OAL (for process and filter reactors)
Polished 19 mm diameter glass stirrer shaft with a 90° four-blade agitator, 105 mm OD and 18 mm blade width, and 630 mm overall length. Designed for process and filter reactors and to operate with PTFE bearings for reduced abrasion and vacuum-tight sealing.
- 19 mm precision ground and polished glass shaft.
- Four-blade 90° glass agitator with 105 mm outer diameter and 18 mm blade width.
- Overall length 630 mm suitable for mid-size reactor vessels.
- Designed for use with PTFE bearings to minimize abrasion and help maintain vacuum-tight seals.
- Intended for process and filter reactors and compatible with standard reactor support frames.
Chemglass Life Sciences Reactor Support Frame, 30L with 18.6" Valve Clearance OR 50L (Short) with 15.2" Valve Clearance, 28.25" W x 20" D x 75.25" H
Reactor Support Frame, 30L with 18.6" Valve Clearance OR 50L (Short) with 15.2" Valve Clearance, 28.25" W x 20" D x 75.25" H. Open air design, with decreased frame depth, allows greater access to the reactor and peripheral glassware. Motor mount arm can be used with either electric, air, or XP motors and can swing out of the way for greater access to reactor. Design allows support frame to be used for 30L through 50L Jacketed or Unjacketed reactor systems. Glassware can be quickly installed and removed by one person saving time and frustration normally associated with out-of-date designs.
Chemglass Life Sciences Stirrer Assembly, Macro, Chem-Stir, 19mm x 75mm Blade Fits 500mL-5L Flask, 29/42 Bearing, 10mm OD x 445mm Stirrer Shaft
Stirrer Assembly, Macro, Chem-Stir, 19mm x 75mm Blade Fits 500mL-5L Flask, 29/42 Bearing, 10mm OD x 445mm Stirrer Shaft. Assembly consists of a 10mm OD Chem-Stir™ stirrer shaft, a precision bore-bearing having a standard taper inner joint and a PTFE blade. The blade is sized to fit the listed flask capacities.